[et_pb_section fb_built="1" _builder_version="4.25.0" _module_preset="default" background_color="#000000" global_colors_info="{}"][et_pb_row _builder_version="4.25.0" _module_preset="default" global_colors_info="{}"][et_pb_column type="4_4" _builder_version="4.25.0" _module_preset="default" global_colors_info="{}"][et_pb_image src="http://headless.local/wp-content/uploads/2024/05/53.jpg" alt="lost vape" _builder_version="4.25.1" _module_preset="default" hover_enabled="0" global_colors_info="{}" align="center" sticky_enabled="0"][/et_pb_image][et_pb_text _builder_version="4.25.0" _module_preset="default" global_colors_info="{}"]

Lost Vape Ursa Mini Pod Kit Review: A Great All-Around Pod Vape

[/et_pb_text][et_pb_text _builder_version=”4.25.0″ _module_preset=”default” global_colors_info=”{}”]

September 1, 2021/in News/by Administrator

[/et_pb_text][et_pb_text _builder_version=”4.25.0″ _module_preset=”default” global_colors_info=”{}”]

Lost Vape Ursa Mini

by  Robert B.  July 27, 2021, versedvaper

[/et_pb_text][et_pb_image src="http://headless.local/wp-content/uploads/2024/05/Lost-Vape-Ursa-Mini-3-150×150-1.webp" alt="lost vape" _builder_version="4.25.0" _module_preset="default" global_colors_info="{}"][/et_pb_image][et_pb_text _builder_version="4.25.0" _module_preset="default" global_colors_info="{}"]

The Ursa Mini Pod Kit from Lost Vape is the latest in their Quest line of devices. While Lost Vape are known for high-end devices with DNA chips like the Lost Vape Centaurus and Orion Plus, their Quest Line is made up of more affordably priced devices. This doesn’t mean that they’re not good devices, though. In fact, the majority of the Quest devices that we’ve reviewed here on Versed Vaper have proven to be great (although there were a few that didn’t fare so well).

The Ursa Mini is the smaller brother to the Ursa Multi Kit that Daniel reviewed a couple of months back. It retains a similar design but is now much smaller and lighter. As opposed to the high power of the Ursa Multi Kit, the Ursa Mini is a low powered pod vape that will fire up to 30W and it packs a 1200mAh internal battery that charges through Type-C charging.

This device was sent to me directly by Lost Vape for the purpose of this review.

Box Contents

[/et_pb_text][et_pb_image src="http://headless.local/wp-content/uploads/2024/05/Lost-Vape-Ursa-Mini-Box-Contents.webp" alt="lost vape" _builder_version="4.25.0" _module_preset="default" global_colors_info="{}"][/et_pb_image][et_pb_text _builder_version="4.25.0" _module_preset="default" global_colors_info="{}"]

• 1 x Ursa Mini Pod Device
• 1 x Type-C Charging Cable
• 1 x 0.4Ω UB Lite L1 Coil
• 1 x 1.0Ω UB Lite L6 Coil
• 1 x User Manual

Specifications

• Zinc Alloy & Stainless Steel
• Dimensions: 30.7mm x 26mm x 107.22 mm
• 3ml Pod Capacity
• Battery: 1200mAh Internal Battery
• Power range: 5 – 30W
• 0.69” Display
• Uses UB Lite Coils

Design & Build Quality

[/et_pb_text][/et_pb_column][/et_pb_row][et_pb_row column_structure="1_2,1_2" _builder_version="4.25.0" _module_preset="default" global_colors_info="{}"][et_pb_column type="1_2" _builder_version="4.25.0" _module_preset="default" global_colors_info="{}"][et_pb_image src="http://headless.local/wp-content/uploads/2024/05/Lost-Vape-Ursa-Mini-Display.webp" alt="lost vape" _builder_version="4.25.0" _module_preset="default" global_colors_info="{}"][/et_pb_image][/et_pb_column][et_pb_column type="1_2" _builder_version="4.25.0" _module_preset="default" global_colors_info="{}"][et_pb_image src="http://headless.local/wp-content/uploads/2024/05/Lost-Vape-Ursa-Mini-1.webp" alt="lost vape" _builder_version="4.25.0" _module_preset="default" global_colors_info="{}"][/et_pb_image][/et_pb_column][/et_pb_row][et_pb_row column_structure="1_2,1_2" _builder_version="4.25.0" _module_preset="default" global_colors_info="{}"][et_pb_column type="1_2" _builder_version="4.25.0" _module_preset="default" global_colors_info="{}"][et_pb_image src="http://headless.local/wp-content/uploads/2024/05/Lost-Vape-Ursa-Mini-3.webp" alt="lost vape" _builder_version="4.25.0" _module_preset="default" global_colors_info="{}"][/et_pb_image][/et_pb_column][et_pb_column type="1_2" _builder_version="4.25.0" _module_preset="default" global_colors_info="{}"][et_pb_image src="http://headless.local/wp-content/uploads/2024/05/Lost-Vape-Ursa-Mini-4.webp" alt="lost vape" _builder_version="4.25.0" _module_preset="default" global_colors_info="{}"][/et_pb_image][/et_pb_column][/et_pb_row][et_pb_row _builder_version="4.25.0" _module_preset="default" global_colors_info="{}"][et_pb_column type="4_4" _builder_version="4.25.0" _module_preset="default" global_colors_info="{}"][et_pb_text _builder_version="4.25.0" _module_preset="default" global_colors_info="{}"]

The Ursa Mini keeps the same sort of design that we’ve seen on the Ursa Multi Kit and Lost Vape Grus. It’s made of zinc alloy and stainless steel and has a tall and slim shape with panels on both sides. I really liked the design of the Grus and Ursa Multi so I’m glad that they stuck with the same design here.

But this is the Ursa ‘Mini’ after all so it’s nowhere near as large as its older brothers. It stands at 107mm tall and it is 26mm wide and about 31mm deep. It’s also surprisingly light so it feels nice in the hand. It has a little bit of weight to it so that it doesn’t feel cheap, but it isn’t heavy at all.

There are 8 color combinations for the Ursa Mini. These will each get you a different panel design and a different body color. I received the “Crystal Cream” color which has a brushed silver frame and silver panels with shiny accents. The panels on my unit almost feel like they’re made of a smooth fabric which is cool. I think that it looks very nice.

The branding is really subtle and not in your face at all. Lost Vape is printed in small lettering on one side of the frame and Ursa Mini on the other. Aside from this branding and the panels, the rest of the Ursa Mini is smooth and plain. I think that the shape and design are enough to make it a good looking device; there’s no need to go overboard with designs and logos. I say good job to Lost Vape with the design.

At the top of the Ursa Mini, just below where the pod sits, is an airflow control ring. This ring works on a stopper and has vertical lines cut into it for grip. The ring turns very smoothly and has just the right amount of resistance where it will stay where it’s set, but will not turn by accident.

The airflow setup is made of 4 holes on each side of the AFC ring; 1 large hole and 3 successively smaller holes. This gives you the option of a more open draw when using the lower resistance UB Lite coils, or you can restrict it down to use the MTL-oriented coils. I’ll get more into the airflow in my performance section.

There are 3 buttons on the front side of the Ursa Mini. All of the buttons are made of plastic. The fire button is square while the adjustment buttons are long and slim with rounded edges. All of the buttons are very tactile and responsive.

The 0.69” display is dated looking but it works well. It’s nice and bright and easy to read, it just looks very old school. Still, I like the simplicity and that it does what it’s supposed to do and that’s give you basic information. Unfortunately, there’s no battery percentage indicator on the screen.

[/et_pb_text][et_pb_image src="http://headless.local/wp-content/uploads/2024/05/Lost-Vape-Ursa-Mini-Pod.webp" alt="lost vape" _builder_version="4.25.0" _module_preset="default" global_colors_info="{}"][/et_pb_image][et_pb_text _builder_version="4.25.0" _module_preset="default" global_colors_info="{}"]

The pod is held in place with magnets and it’s very secure. There’s a little bit of wiggle if you try moving the pod but none during regular use. The pod has quite a dark tint to it so it can be hard to see your remaining ejuice if there’s not enough light. However, holding it up to a light source lets you easily see how much ejuice you have left.

The fill port on the pod is on the underside so you have to remove it to refill. It’s plugged by a rubber plug that seems to work well. I haven’t had any ejuice leak out whatsoever so it’s definitely doing its job.

The drip tip on the pod is not removable and seems to be 510 sized. A swappable 510 drip tip would have been nice.

The design and build quality of the Ursa Mini are just as good as it’s older brother, the Ursa Multi. The appearance and finish of the frame and panels are very attractive and give the Ursa Mini a classy look. As a whole package it just feels like a quality product that is very well made.

Coils

[/et_pb_text][et_pb_image src="http://headless.local/wp-content/uploads/2024/05/Lost-Vape-Ursa-Mini-Coils.webp" alt="lost vape" _builder_version="4.25.0" _module_preset="default" global_colors_info="{}"][/et_pb_image][et_pb_text _builder_version="4.25.0" _module_preset="default" global_colors_info="{}"]

The Ursa Mini uses Lost Vape’s UB Lite coils, the same coils used by the UB Lite Pod Kit. Included with the kit are a 0.4Ω UB Lite L1 coil (20-30W) and a 1.0Ω UB Lite L6 coil (10-15W). These coils just push fit into the bottom of the pod. Just be aware that you have to line up the flat sides of the coil for it to line up properly and fit all the way in.

In addition to the two coils that come with the kit, you can also get two other coils: a 0.8Ω UB Lite L3 coil (12-17W) and a 1.4Ω UB Lite L5 Coil (8-10W). This gives you two options for MTL vaping and two coil options for DL vaping. The 0.8Ω, 1.0Ω, and 1.4Ω coil can all be used for vaping nicotine salts. I have all of these coils on hand so I will be going over each of them in the performance section.

Battery Life & Charging

[/et_pb_text][et_pb_image src="http://headless.local/wp-content/uploads/2024/05/Lost-Vape-Ursa-Mini-5.webp" alt="lost vape" _builder_version="4.25.0" _module_preset="default" global_colors_info="{}"][/et_pb_image][et_pb_text _builder_version="4.25.0" _module_preset="default" global_colors_info="{}"]

The Ursa Mini has a 1200mAh internal battery that is non-removable. For the size of this device I was expecting a larger battery but it turns out that for lower wattage vaping this battery does just fine. When using the lower wattage MTL coils at up to 15W, I always got at least a day of use, usually a day and a half. But with the 0.4Ω coil at 30W the battery life was nowhere near as good and tended to die before the day was half way through.

The Type-C charging port is located on the bottom of the Ursa Mini so you have to lay it down on its side to charge. While charging, the screen displays a battery icon animation but it doesn’t give any actual info as to what the charge level is or how long it will take. Charging times are a little long; I timed an hour and 10 minutes for a full charge.

Performance

[/et_pb_text][et_pb_image src="http://headless.local/wp-content/uploads/2024/05/Lost-Vape-Ursa-Mini-6.webp" alt="lost vape" _builder_version="4.25.0" _module_preset="default" global_colors_info="{}"][/et_pb_image][et_pb_text _builder_version="4.25.0" _module_preset="default" global_colors_info="{}"]

The Ursa Mini isn’t about giving you every feature and option possible in a pod vape. No, this is a device that is meant to reliably produce vapor and good flavor — that’s it. You can lock the adjustment buttons by holding up and the fire button and clear the puff counter by holding the down and fire button. Other than that, there are no settings or menus to worry about. What you get with the Ursa Mini is a simple and small vaping device.

I have the following coils that I will be going over:

• – 0.4Ω UB Lite L1 coil (20-30W)
• – 0.8Ω UB Lite L3 coil (12-17W)
• – 1.0Ω UB Lite L6 coil (10-15W)
• – 1.4Ω UB Lite L5 Coil (8-10W)

Starting off with the 0.4Ω coil, this is a DL coil. It has a range of 20-30W but I always used it at the maximum of 30W which was not good for battery life. This was where I got the best flavor from this coil though and where the coil felt like it was performing at its best. I used a 6mg, 80VG ejuice with this coil and the flavor is better than I was expecting it to be. Wide open airflow gives a nice DL draw that can be cut down to a restricted DL. It’s not completely wide open and airy even on the most open airflow setting though so it might not satisfy those who like very airy draws. Other than that, this coil is amazing.

The 0.8Ω coil is sort of a dual use coil. It can be used for RDL vaping or for a loose MTL vape depending how you set the airflow. It can also be used with either regular ejuices or nic salts. Being a sort of dual use coil, it shouldn’t surprise you that it doesn’t do excellent for either use. It’s not a bad coil but it’s just not as good as it could be if the resistance was changed just a little more up or a little more down. I found 15W to be perfect no matter what ejuice I used, but I kept the airflow open for regular nic ejuices and closed it down when using nic salts.

The 1.0Ω coil was my personal favorite of the four. I set it to 13.5W and loaded up my 30mg nic salt and the vape is just heavenly. It’s a great mouth to lung vape with just one or two holes open. This can be opened up to a looser MTL draw by opening up the airflow even more. Flavors from my ejuice are individually discernible with this coil and that’s not something that can be said about every pod vape/coil.

Last and also least is the 1.4Ω. This coil has a very small range of 8-10W. Honestly, I found this coil to be disappointing. The vapor is very cool, even at 10W, and the draw feels very weak. With nicotine salts I expect to get a full draw but that wasn’t happening from this coil. Lack of flavor and a weak draw are the key points of the 1.4Ω coil.

Verdict

[/et_pb_text][et_pb_code _builder_version=”4.25.0″ _module_preset=”default” global_colors_info=”{}”]Share On:[Sassy_Social_Share][/et_pb_code][/et_pb_column][/et_pb_row][/et_pb_section]

[et_pb_section fb_built="1" _builder_version="4.25.0" _module_preset="default" background_color="#000000" global_colors_info="{}"][et_pb_row _builder_version="4.25.0" _module_preset="default" global_colors_info="{}"][et_pb_column type="4_4" _builder_version="4.25.0" _module_preset="default" global_colors_info="{}"][et_pb_image src="http://headless.local/wp-content/uploads/2024/05/852.webp" alt="lost vape" _builder_version="4.25.1" _module_preset="default" hover_enabled="0" global_colors_info="{}" align="center" sticky_enabled="0"][/et_pb_image][et_pb_text _builder_version="4.25.0" _module_preset="default" global_colors_info="{}"]

Lost Vape UB Lite Pod Kit Review

[/et_pb_text][et_pb_text _builder_version=”4.25.0″ _module_preset=”default” global_colors_info=”{}”]

April 2, 2021/in News/by Administrator

[/et_pb_text][et_pb_text _builder_version=”4.25.0″ _module_preset=”default” global_colors_info=”{}”]

Lost Vape UB Lite Pod Kit

I can anticipate that Lost Vape UB Lite Pod Kit in MTL mode really surprised me!

In this last period we have been invaded by an infinity of useless Pod systems, most of these devices do not have intelligent control functions and cannot satisfy users at the level of AFC adjustments. Furthermore, the “basic” systems with disposable cartridges often do not offer good performance, the stroke in the throat and the aromatic restitution are in most cases limited, forcing the user to use very “charged” liquids.

Lost vape has solved all these problems by creating UB Lite Pod Kit, the device uses three new replaceable coils with Restricted Direct to Lung (RDL) and Mouth To Lung (MTL) performance in the arc of use comparable to those of the best tanks.

UB Lite Pod Kit with its 1,000mAh battery that is recharged via the USB Type C port is capable of delivering up to 30W, but the power is nothing without control, so Lost Vape has devised a simple but really very much AFC system effective able to ensure a puff in the same way very narrow or discreetly open.

The UB Lite Pod Kit chipset offers the possibility of vaping both in automatic mode and in “fire button” mode with the useful function of being able to exclude the button by blocking it. In addition, the kit despite not having a display, is suitable for the user, in fact it has a Smart recognition function, with the LED that changes color when the cartridge is inserted, associating a preset color to each coil.

Enjoy the reading.

The white cardboard packaging on the front; the Lost Vape logo and the indication on the chipset used (Quest), the image of the device and its name (UB Lite Pod Kit).

On the back are shown; the content, warnings, social networks for promotional activities, place of origin, color of the product inside the box, scratch & check, finally logos & brands.

[/et_pb_text][et_pb_image src="http://headless.local/wp-content/uploads/2024/05/Lost-Vape-UB-Lite-Pod-2.webp" alt="lost vape" _builder_version="4.25.0" _module_preset="default" global_colors_info="{}"][/et_pb_image][et_pb_text _builder_version="4.25.0" _module_preset="default" global_colors_info="{}"]

On the side you can read the slogan “The Modern Demarcation” and some main features of this Item.

[/et_pb_text][et_pb_image src="http://headless.local/wp-content/uploads/2024/05/Lost-Vape-UB-Lite-Pod-3.webp" alt="lost vape" _builder_version="4.25.0" _module_preset="default" global_colors_info="{}"][/et_pb_image][et_pb_text _builder_version="4.25.0" _module_preset="default" global_colors_info="{}"]

UB Lite Pod Kit Standard:
1x Ultra Boost S pod device
1x Pod (2ml pre-installed)
1x Ultra Boost Lite Mesh-Coil L5 1.4Ω (8-10W) MTL
1x Ultra Boost Lite Mesh-Coil L1 0.4Ω (20-30W) DL
1x USB Type-C Cable
1x User Manual
1x Warranty card
1x Lanyard

[/et_pb_text][et_pb_image src="http://headless.local/wp-content/uploads/2024/05/Lost-Vape-UB-Lite-Pod-4.webp" alt="lost vape" _builder_version="4.25.0" _module_preset="default" global_colors_info="{}"][/et_pb_image][et_pb_text _builder_version="4.25.0" _module_preset="default" global_colors_info="{}"]

Measurements and features:
• Body material: Aluminum
• Dimensions: 115×20.6×19.8mm
• Weight: 47.5g
• Battery: 1000 mAh (integrated)
• Battery voltage: 3.0V-4.2V
• Output voltage: 3.0V-4.0V
• Power range: 7-30W
• Current range: 2.0A-9.0A
• Supported Coil Range: 0.3-3.0Ω
• AFC: Adjustable
• Refil: Side

[/et_pb_text][et_pb_image src="http://headless.local/wp-content/uploads/2024/05/Lost-Vape-UB-Lite-Pod-5.webp" alt="lost vape" _builder_version="4.25.0" _module_preset="default" global_colors_info="{}"][/et_pb_image][et_pb_text _builder_version="4.25.0" _module_preset="default" global_colors_info="{}"]

There are 7 color options to choose from:
Galaxy Blue, Fantasy Pink, Magic Red, Tiffany Green, Midnight Black, Mystic Gunmetal and Space Silver.

[/et_pb_text][et_pb_image src="http://headless.local/wp-content/uploads/2024/05/Lost-Vape-UB-Lite-Pod-6.webp" alt="lost vape" _builder_version="4.25.0" _module_preset="default" global_colors_info="{}"][/et_pb_image][et_pb_text _builder_version="4.25.0" _module_preset="default" global_colors_info="{}"]

First impressions:
I was expecting the usual system with “disposable” cartridges luckily I was proved wrong, in fact UB Lite Pod Kit uses a new version of replaceable Mesh-Coils of the Ultra Boost Lite series, this relieved me because I had the opportunity to try other products similar to this one from Lost Vape like Aspire’s AVP Cube which are undoubtedly more evolved than a basic system.
In addition to the two different coils supplied, Lost Vape sent me another one to try and this pleased me, so I can give a more in-depth evaluation.

I was sent two samples, one in “Tiffany Green” and the other in “Space Silver”. The whole range has sober and attractive colors with well executed finishes.
At first glance UB Lite Pod Kit has a very simple design with the classic tube shape but with a flat side, the construction is made of aluminum so it is a sufficiently robust and light device, portability is naturally magnificent, included in the package there is also a lanyard with a sturdy rubber ring

[/et_pb_text][et_pb_image src="http://headless.local/wp-content/uploads/2024/05/Lost-Vape-UB-Lite-Pod-7.webp" alt="lost vape" _builder_version="4.25.0" _module_preset="default" global_colors_info="{}"][/et_pb_image][et_pb_image src="http://headless.local/wp-content/uploads/2024/05/Lost-Vape-UB-Lite-Pod-8.webp" alt="lost vape" _builder_version="4.25.0" _module_preset="default" global_colors_info="{}"][/et_pb_image][et_pb_text _builder_version="4.25.0" _module_preset="default" global_colors_info="{}"]

The flattened front side is finely finished with a texture of transversal lines barely perceptible to the touch, the upper part has a reference inlet for the direction of insertion of the cartridge. Centrally there is the Led and the small metal Fire button slightly protruding and round shape, at the bottom there is the Lost Vape logo and the writing “UB LITE”

[/et_pb_text][et_pb_image src="http://headless.local/wp-content/uploads/2024/05/Lost-Vape-UB-Lite-Pod-9.webp" alt="lost vape" _builder_version="4.25.0" _module_preset="default" global_colors_info="{}"][/et_pb_image][et_pb_text _builder_version="4.25.0" _module_preset="default" global_colors_info="{}"]

On the back there is the AFC system with a small metal adjustment knob, the RDL writing indicates the direction to follow to obtain an open vape, while the MTL writing indicates a choice of restricted puff, then there are many small notches that indicate intermediate options for fine and precise adjustment.

[/et_pb_text][et_pb_image src="http://headless.local/wp-content/uploads/2024/05/Lost-Vape-UB-Lite-Pod-10.webp" alt="lost vpae" _builder_version="4.25.0" _module_preset="default" global_colors_info="{}"][/et_pb_image][et_pb_image src="http://headless.local/wp-content/uploads/2024/05/Lost-Vape-UB-Lite-Pod-11.webp" alt="lost vape" _builder_version="4.25.0" _module_preset="default" global_colors_info="{}"][/et_pb_image][et_pb_text _builder_version="4.25.0" _module_preset="default" global_colors_info="{}"]

Inside the compartment / pod there is a metal ring that has three functions; the first is to act as a joint for the cartridge, the second function is to prevent lateral infiltration of air, thus making the adjustment of the AFC much more precise than all other competitive devices. On the bottom there are the gold-plated contact pins and the automatic shooting activation sensor that remains hidden under the ring (third function), therefore protected from liquid infiltrations, all this seems to me very rational and intelligent.

On the bottom of the device there is the Usb-C charging socket, three vent holes for the integrated battery, the logo and the reference to the production area.

[/et_pb_text][et_pb_image src="http://headless.local/wp-content/uploads/2024/05/Lost-Vape-UB-Lite-Pod-12.webp" alt="lost vape" _builder_version="4.25.0" _module_preset="default" global_colors_info="{}"][/et_pb_image][et_pb_text _builder_version="4.25.0" _module_preset="default" global_colors_info="{}"]

Lost Vape UB Lite Pod Kit exploded view:

[/et_pb_text][et_pb_image src="http://headless.local/wp-content/uploads/2024/05/Lost-Vape-UB-Lite-Pod-13.webp" alt="lost vape" _builder_version="4.25.0" _module_preset="default" global_colors_info="{}"][/et_pb_image][et_pb_text _builder_version="4.25.0" _module_preset="default" global_colors_info="{}"]

UB Lite Pod 2ml:

The cartridge is made of dark PCTG, but this does not prevent you from seeing the liquid level, the suction terminal has a comfortable flattened shape, the refil is of the lateral type protected by a silicone rubber cap and the UB Lite Mesh Coil are inserted from below with the “press and pull” method.

[/et_pb_text][et_pb_image src="http://headless.local/wp-content/uploads/2024/05/Lost-Vape-UB-Lite-Pod-14.webp" alt="lost vape" _builder_version="4.25.0" _module_preset="default" global_colors_info="{}"][/et_pb_image][et_pb_image src="http://headless.local/wp-content/uploads/2024/05/Lost-Vape-UB-Lite-Pod-15.webp" alt="lost vape" _builder_version="4.25.0" _module_preset="default" global_colors_info="{}"][/et_pb_image][et_pb_text _builder_version="4.25.0" _module_preset="default" global_colors_info="{}"]

UB Lite Mesh Coil Range:

[/et_pb_text][et_pb_image src="http://headless.local/wp-content/uploads/2024/05/Lost-Vape-UB-Lite-Pod-16.webp" alt="lost vape" _builder_version="4.25.0" _module_preset="default" global_colors_info="{}"][/et_pb_image][et_pb_text _builder_version="4.25.0" _module_preset="default" global_colors_info="{}"]

Operation Guide:
By inserting a new coil, the Smart recognition function activates the LED which changes color by associating a preset color to each coil.
– UB Mesh Coil 0.4Ω Red Led.
– UB Mesh Coil 0.8Ω Blue Led.
– UB Mesh Coil 1.4Ω Green Led.

[/et_pb_text][et_pb_image src="http://headless.local/wp-content/uploads/2024/05/Lost-Vape-UB-Lite-Pod-17.webp" alt="lost vape" _builder_version="4.25.0" _module_preset="default" global_colors_info="{}"][/et_pb_image][et_pb_text _builder_version="4.25.0" _module_preset="default" global_colors_info="{}"]

– Power on / off: Press the Fire button 5 times within 2 seconds, the white led blinks 5 times.
– Lock / Unlock: Press the Fire button 3 times to lock and unlock the device.
Automatic activation will continue to work with the Fire button locked.

[/et_pb_text][et_pb_image src="http://headless.local/wp-content/uploads/2024/05/Lost-Vape-UB-Lite-Pod-18.webp" alt="lost vape" _builder_version="4.25.0" _module_preset="default" global_colors_info="{}"][/et_pb_image][et_pb_text _builder_version="4.25.0" _module_preset="default" global_colors_info="{}"]

Charging indications:
The LED indicator shows the battery levels as follows:
– Red light <3.7V
– Blue light <3.9V
– Green light; fully charged

Lost Vape UB Lite Pod Kit has a built-in DC 5V TYPE-C port. By connecting the USB port to a power source, the LED indicator emits a color referring to the battery charge level, once fully charged the green light remains steady.

Protection:
While charging, the device does not work for safety reasons.

Low battery:
If the voltage before use is less than 3.3V the LED indicator will blink 5 times and the output will stop automatically.
During use, the output stops automatically if the voltage is lower than 3.0V.

Short circuit:
White light flashes 3 times when short circuit occurs.

Open circuit:
When no atomizer is installed, the indicator flashes 3 times.

Cut Off:
The LED indicator flashes 8 times and the output power stops when 10s of consecutive puff is reached.

[/et_pb_text][et_pb_image src="http://headless.local/wp-content/uploads/2024/05/Lost-Vape-UB-Lite-Pod-19.webp" alt="lost vape" _builder_version="4.25.0" _module_preset="default" global_colors_info="{}"][/et_pb_image][et_pb_text _builder_version="4.25.0" _module_preset="default" global_colors_info="{}"]

Vaping test and conclusions:
If on the one hand I appreciated the simple lines of this device, the dimensions and its sobriety in the colors, on the other hand I was really impressed by its performance over the entire range of MTL use to the point of trespassing in the context of a vape RDL. In practice, Lost Vape UB Lite offers high-level performance that is difficult to find in similar devices from the competition.

The credit undoubtedly goes to the new replaceable UB Lite coils which are supported by a truly apt and rare AFC adjustment.
The question I asked myself from the start is is 1,000 mAh are enough?
The answer … Although I would have preferred at least 1,500mAh is Yes!
If you are a moderate or “intermediate” vaper and do not go beyond a consumption of 3ml of liquid daily you will not need to recharge it before going to sleep.
Before charging more or less you will be able to consume 3ml of liquid regardless of whether you are using the 0.4Ω coil , the 0.8Ω one or the 1.0Ω one.
The difference between these coils is due only to the autonomy time which in the case of the 0.4Ω coil is naturally more reduced, the device with this coil works between 20 and 30W and the battery management seemed good to me throughout the period of use, without big drops in power even with the semi-discharged battery. Logically, therefore, the autonomy is considerably extended with the choice of the 0.8Ω coil and even more so with the 1.0Ω one which require a lower discharge voltage.

With the 1.0Ω coil and with reduced AFC adjustments you can get a perfect MTL vape, a good hit in the throat and a decent aromatic yield, the 0.8Ω coil for my taste is a bomb, yes I really liked this a lot, really takes advantage of the ability to transfer the flavor characteristics of each liquid, the hit in the throat is powerful even with low concentrations of nicotine, really excellent for an MTL vape restricted adjusting the AFC towards the MTL position the “hit” increases exponentially.
As I anticipated, the 0.4Ω coil is the one that discharges the battery more quickly but it is also the one that offers an excellent aromatic yield in RDL / DL mode with a decent dose of clouds and vapor, also in this case the hit in the throat he is definitely strong and rewarding even with only 50% of the AFC opening.
All 3 UB Coils have common positive characteristics of good functioning; little formation of condensation, great “Hit” and quality aromatic yield I think that each of you will find the one that best suits your style, I am sure.

Thanks for reading

Thanks to Lost Vape for providing me with this item for the review:
UB LITE POD KIT – Lost Vape

[/et_pb_text][et_pb_image src="http://headless.local/wp-content/uploads/2024/05/Lost-Vape-UB-Lite-Pod-20.webp" alt="lost vape" _builder_version="4.25.0" _module_preset="default" global_colors_info="{}"][/et_pb_image][et_pb_code _builder_version="4.25.0" _module_preset="default" global_colors_info="{}"]Share On:[Sassy_Social_Share][/et_pb_code][/et_pb_column][/et_pb_row][/et_pb_section]

[et_pb_section fb_built="1" _builder_version="4.25.0" _module_preset="default" background_color="#000000" global_colors_info="{}"][et_pb_row _builder_version="4.25.0" _module_preset="default" global_colors_info="{}"][et_pb_column type="4_4" _builder_version="4.25.0" _module_preset="default" global_colors_info="{}"][et_pb_image src="http://headless.local/wp-content/uploads/2024/05/8529.webp" alt="lost vape" _builder_version="4.25.1" _module_preset="default" hover_enabled="0" global_colors_info="{}" align="center" sticky_enabled="0"][/et_pb_image][et_pb_text _builder_version="4.25.0" _module_preset="default" global_colors_info="{}"]

Lost Vape GRUS v2 + UB Pro Pod Tank

April 2, 2021/in News/by Administrator

[/et_pb_text][et_pb_text _builder_version=”4.25.0″ _module_preset=”default” global_colors_info=”{}”]

Lost Vape GRUS v2 + UB Pro Pod Tank

started by Frenkyou, Mar 1, 2021.

Lost Vape after the successful sales of the Mod Grus 100W first version, releases an update called GRUS v2, this evolution uses a Chipset 2.0 “Quest” much richer than the previous one and completely different in menu navigation and settings.

GRUS v2 can be powered by different types of cells (18650-20700-21700), in addition to the modes; POWER, TC-SS904, TC-SS316, TC-TI, TC-NI, VPC, Voltage, Bypass allows you to select three levels of Boost and three different user pre-sets.

[/et_pb_text][et_pb_image src="http://headless.local/wp-content/uploads/2024/05/Lost-Vape-Grus-v2-ModUB-Pro-Tank-1.webp" alt="lost vape" _builder_version="4.25.0" _module_preset="default" global_colors_info="{}"][/et_pb_image][et_pb_text _builder_version="4.25.0" _module_preset="default" global_colors_info="{}"]

* The Grus mod v2 Kit will be sold with Tank UB PRO (5ml) or UB Tank (5.5ml), interesting the TC / SS904 option for the 0.3Ω UB PRO Coil.

[/et_pb_text][et_pb_image src="http://headless.local/wp-content/uploads/2024/05/Lost-Vape-Grus-v2-ModUB-Pro-Tank-2.webp" alt="lost vape" _builder_version="4.25.0" _module_preset="default" global_colors_info="{}"][/et_pb_image][et_pb_text _builder_version="4.25.0" _module_preset="default" global_colors_info="{}"]

Enjoy the reading.

The elegant cardboard packaging is decorated in a premium style with a bow at the top and with a rosette at the bottom which in turn contains a number (4) to indicate how many coils are contained, there is also a “Best Wishes” and this could indicate that it is not the final packaging but perhaps a set up for reviewers.
On the front side the image of the Kit Grus v2 is placed centrally, there are also the Lost Vape logo and the color indication of this sample in the form of an icon.

On the back they find a place; Lost Vape LTD’s content, instructions for use, barcode, scratch & check, logos, trademarks and address.
On the remaining sides, in addition to the slogan “The Modern Demarcation”, there are all the social icons of reference where the company promotes its products.

[/et_pb_text][et_pb_image src="http://headless.local/wp-content/uploads/2024/05/Lost-Vape-Grus-v2-ModUB-Pro-Tank-3.webp" alt="lost vape" _builder_version="4.25.0" _module_preset="default" global_colors_info="{}"][/et_pb_image][et_pb_text _builder_version="4.25.0" _module_preset="default" global_colors_info="{}"]

Packing List:
1 × Grus 100W Mod
1x UB Pro Pod Tank (5ml, 810 Drip Tip)
2x 0.15Ω UB Pro P1 Mesh Coil (70-90W)
2x 0.3Ω UB Pro P3 Mesh Coil (60-70W, TC 260-290 ° C, 500-550 ° F)
1 × Type-C USB Cable
1 x 18650 Battery Adapter
4 x O-Rings
1 × Warranty Card
1 × User Manual

[/et_pb_text][et_pb_image src="http://headless.local/wp-content/uploads/2024/05/Lost-Vape-Grus-v2-ModUB-Pro-Tank-4.webp" alt="lost vape" _builder_version="4.25.0" _module_preset="default" global_colors_info="{}"][/et_pb_image][et_pb_text _builder_version="4.25.0" _module_preset="default" global_colors_info="{}"]

Features and Dimensions
• Material: Zinc alloy
• Dimensions: 142.1×40.5×30.5mm
• Weight: 215 G
• Screen: 0.96 “color TFT
• Battery: single 21700/20700/18650 battery （Not included）
• Battery voltage: 3.3V-4.2V
• Voltage Output: 0.8V-7V
• Power range: 5-100W
• Current range: 0.3A -30A
• Temperature range: 200 ° F-600 ° F / 100 ℃ -300 ℃
• Supported Coil Range: 0.1Ω-5.0Ω
• UB Pro Tank Capacity: 5ml (2ml for all TPD versions).

[/et_pb_text][et_pb_image src="http://headless.local/wp-content/uploads/2024/05/Lost-Vape-Grus-v2-ModUB-Pro-Tank-5.webp" alt="lost vape" _builder_version="4.25.0" _module_preset="default" global_colors_info="{}"][/et_pb_image][et_pb_text _builder_version="4.25.0" _module_preset="default" global_colors_info="{}"]

Nine Colors Available:

Carbon Fiber Series:
Black / Carbon Fiber
Gunmetal / Carbon Fiber
SS / carbon fiber

Wood Series:
SS / Zebra Wood
Black / Walnut wood
Gunmetal / Walnut wood

Universal Series:
Black / Marine
Gunmetal / Disconcerting
SS / Jungle

[/et_pb_text][et_pb_image src="http://headless.local/wp-content/uploads/2024/05/Lost-Vape-Grus-v2-ModUB-Pro-Tank-6.webp" alt="lost vape" _builder_version="4.25.0" _module_preset="default" global_colors_info="{}"][/et_pb_image][et_pb_text _builder_version="4.25.0" _module_preset="default" global_colors_info="{}"]

First impressions:
GRUS v2 differs from the previous model in two aspects, the first visible instantly and the other purely technical visible only to the user during use. The visible aspect is represented by the new 5.0ml circular UB PRO Tank or 5.5ml UB depending on the choice, the technical aspect is derived from the presence of a completely renewed chipset, particularly rich in functions, stable and performing.

It would be simple and reductive to describe the appearance of this Mod to a simple geometric figure, in reality the surfaces are an animated set of convexities, curves, bevels, grooves and flattened areas. There are no edges, the lines always connect with each other in a sweet and functional way to ergonomics and tactile pleasure.

[/et_pb_text][et_pb_image src="http://headless.local/wp-content/uploads/2024/05/Lost-Vape-Grus-v2-ModUB-Pro-Tank-7.webp" alt="lost vape" _builder_version="4.25.0" _module_preset="default" global_colors_info="{}"][/et_pb_image][et_pb_text _builder_version="4.25.0" _module_preset="default" global_colors_info="{}"]

The frame is built entirely of zinc alloy, this is the stainless steel parts; the base 510, the support base of the Mod and the battery compartment cap. The plastic parts concern the front panel which contains the display and the control keys.

With so many metal parts the weight of the Grus v2 Kit rises up to 215g! However, you are well prepared to bear this weight, thanks to an ergonomic form factor guessed in the smallest details, moreover the slightly rounded surfaces of both narrow sides favor the grip on the mod.

[/et_pb_text][et_pb_image src="http://headless.local/wp-content/uploads/2024/05/Lost-Vape-Grus-v2-ModUB-Pro-Tank-8.webp" alt="lost vape" _builder_version="4.25.0" _module_preset="default" global_colors_info="{}"][/et_pb_image][et_pb_text _builder_version="4.25.0" _module_preset="default" global_colors_info="{}"]

The 0.96 “TFT Display is an integral part of a screen that also houses the fire button, the Mode button and the Up / Down adjustment buttons. The Display has 6 background colors, the visibility of the fonts in some occasions is not exactly optimal , the display shows all the information useful for vaping except the Volt reading in the VW configuration.To read Voltage it is therefore necessary to switch to the VV mode.

[/et_pb_text][et_pb_image src="http://headless.local/wp-content/uploads/2024/05/Lost-Vape-Grus-v2-ModUB-Pro-Tank-9.webp" alt="lost vape" _builder_version="4.25.0" _module_preset="default" global_colors_info="{}"][/et_pb_image][et_pb_text _builder_version="4.25.0" _module_preset="default" global_colors_info="{}"]

The side view of the Mod shows a different insert in the center depending on the color variant chosen, these samples are part of the categories called by Lost Vape “universal series” and “carbon fiber series”.
In the structure of the Grus it is easy to distinguish the areas of the steel frame from those in zinc alloy, the latter are painted the others are not. The writing “Grus” heads high on the side profile of the 510 cup, on the opposite side the writing is that of the Brand (Lost Vape).

[/et_pb_text][et_pb_image src="http://headless.local/wp-content/uploads/2024/05/Lost-Vape-Grus-v2-ModUB-Pro-Tank-10.webp" alt="lost vape" _builder_version="4.25.0" _module_preset="default" global_colors_info="{}"][/et_pb_image][et_pb_text _builder_version="4.25.0" _module_preset="default" global_colors_info="{}"]

The steel cup is fixed to the Mod via two torx screws, the thread is a classic 510, the contact pin is floating, you can use atomizers with a diameter of up to 31mm without protrusions!

The particular shape of the support base gives great stability to the Grus, on this surface there are three vent holes for the cell, the C E mark, the disposal logo and the words “Designed and Manufactured by Lost Vape Ltd” are shown. Also on this surface we find four torx screws and the cap (with handle) to access the compartment / battery.

[/et_pb_text][et_pb_image src="http://headless.local/wp-content/uploads/2024/05/Lost-Vape-Grus-v2-ModUB-Pro-Tank-11.webp" alt="lost vape" _builder_version="4.25.0" _module_preset="default" global_colors_info="{}"][/et_pb_image][et_pb_text _builder_version="4.25.0" _module_preset="default" global_colors_info="{}"]

The Grus Mod can use different types of cells (18650-20700-21700), The 18650 cell fits with an adapter present in the Kit.

[/et_pb_text][et_pb_image src="http://headless.local/wp-content/uploads/2024/05/Lost-Vape-Grus-v2-ModUB-Pro-Tank-12.webp" alt="lost vape" _builder_version="4.25.0" _module_preset="default" global_colors_info="{}"][/et_pb_image][et_pb_text _builder_version="4.25.0" _module_preset="default" global_colors_info="{}"]

UB Pro Pod Tank and UB Pod Tank System:

The 5ml UB Pro Pod Tank Cartridge uses a replaceable 810 drip tip and is designed to accommodate the new UB Pro Coil series and the new RBA Pro.
The 5.5ml UB Tank Cartridge uses a replaceable 510 drip tip and is made to accommodate all UB coil series and RBA UB base.

[/et_pb_text][et_pb_image src="http://headless.local/wp-content/uploads/2024/05/Lost-Vape-Grus-v2-ModUB-Pro-Tank-13.webp" alt="lost vape" _builder_version="4.25.0" _module_preset="default" global_colors_info="{}"][/et_pb_image][et_pb_text _builder_version="4.25.0" _module_preset="default" global_colors_info="{}"]

The classic circular tank design should not be misleading, this is not a classic magnetic connection system, the Lost Vape technicians have chosen a solid screw fixing between the Pod / PCTG parts and the AFC steel base. This could appear inconvenient when you have to change the coil compared to a magnetic system … However, the system designed by Lost Vape offers several advantages; such as the refill from the top, so you don’t need to detach the tank to fill it, another great plus is to be able to count on better air regulation, in fact the screwing system compared to the magnetic one reduces drafts to a minimum, much more accurate.
The AFC systems of UB Pod Tank and UB Pro Pod Tank are designed with triple air intake to hit the coils with a balanced flow.

* If you have chosen the Grus v2 version equipped with UB PRO Pod Tank you can buy the UB Pod tank version separately.

[/et_pb_text][/et_pb_column][/et_pb_row][et_pb_row column_structure="1_2,1_2" _builder_version="4.25.0" _module_preset="default" global_colors_info="{}"][et_pb_column type="1_2" _builder_version="4.25.0" _module_preset="default" global_colors_info="{}"][et_pb_image src="http://headless.local/wp-content/uploads/2024/05/Lost-Vape-Grus-v2-ModUB-Pro-Tank-14.webp" alt="lost vape" _builder_version="4.25.0" _module_preset="default" global_colors_info="{}"][/et_pb_image][/et_pb_column][et_pb_column type="1_2" _builder_version="4.25.0" _module_preset="default" global_colors_info="{}"][et_pb_image src="http://headless.local/wp-content/uploads/2024/05/Lost-Vape-Grus-v2-ModUB-Pro-Tank-15.webp" alt="lost vape" _builder_version="4.25.0" _module_preset="default" global_colors_info="{}"][/et_pb_image][/et_pb_column][/et_pb_row][et_pb_row _builder_version="4.25.0" _module_preset="default" global_colors_info="{}"][et_pb_column type="4_4" _builder_version="4.25.0" _module_preset="default" global_colors_info="{}"][et_pb_text _builder_version="4.25.0" _module_preset="default" global_colors_info="{}"]

UB Pro Coil Range:
At the moment there are two types of UB Pro sub-ohm coils for the 5ml UB Pro cartridge and they are:
– Mesh-Coil UB Pro P1 NI80 from 0.15Ω with Range 70-90W
– Mesh-Coil UB P3 from 0.3Ω Range 60-70W usable with temperature control in a range of 260-290 ° C and 500-550 ° F.
– UB Pro RBA Deck Resistance, Range: 0.15-3.0Ω (sold separately).

UB Coil Range:
The UB coil series available for the 5.5ml UB cartridge is very complete:
– UB M4 Mesh-Coil 0.2Ω
Coil resistance: 0.2Ω mesh coil
Rate 40-60W
Suitable for DL

– UB M3 Mesh-Coil 0.15Ω
Coil resistance: 0.15Ω mesh coil
Rate 40-70W
Suitable for DL

– UB M1 Mesh-Coil 0.3Ω
Coil resistance: 0.3Ω mesh coil
Rate: 30-40W
Suitable for DL

– UB M2 Mesh-Coil 0.6Ω
Coil resistance: 0.6Ω Mesh Coil
Rate: 20-28W
Suitable for DL

– UB MTL Coil 1.0Ω
Coil resistance: 1.0Ω Regular Coil
Rate: 8-15W
Suitable for MTL

– UB RBA Deck
Resistance Range: 0.15-3.0Ω
Sold separately.

[/et_pb_text][et_pb_image src="http://headless.local/wp-content/uploads/2024/05/Lost-Vape-Grus-v2-ModUB-Pro-Tank-16.webp" alt="lost vape" _builder_version="4.25.0" _module_preset="default" global_colors_info="{}"][/et_pb_image][et_pb_text _builder_version="4.25.0" _module_preset="default" global_colors_info="{}"]

Kindly Lost vape sent me both RBA kits for my test and I thank them.

UB Pro RBA Kit:
– 1 Postless RBA Deck
– 1 Screwable Chimney
– 1 510 adapter
– 2 Cotton laces
– 2 Ø3mm 0.3Ω Complex Coils
– 2 replacement O’ring
– 4 tightening screws.

RBA UB Kit:
– 1 RBA Velocity Deck
– 1 Screwable Chimney
– 1 510 adapter
– 1 Cotton sachet
– 2 Coil Ka1 of 0.6Ω
– 4 replacement O’ring
– 4 tightening screws.
– 1 Allen key

[/et_pb_text][et_pb_image src="http://headless.local/wp-content/uploads/2024/05/Lost-Vape-Grus-v2-ModUB-Pro-Tank-17.webp" alt="lost vape" _builder_version="4.25.0" _module_preset="default" global_colors_info="{}"][/et_pb_image][et_pb_text _builder_version="4.25.0" _module_preset="default" global_colors_info="{}"]

RBA UB Pro and RBA UB build:

The postless deck for the RBA UB Pro is larger in size than the velocity deck of the RBA UB Pro which is quite small, however neither is difficult to regenerate, the only difficulty is getting the right amount of cotton in the velocity style tank which must be precise to avoid dry puffs.

[/et_pb_text][et_pb_image src="http://headless.local/wp-content/uploads/2024/05/Lost-Vape-Grus-v2-ModUB-Pro-Tank-18.webp" alt="lost vape" _builder_version="4.25.0" _module_preset="default" global_colors_info="{}"][/et_pb_image][et_pb_text _builder_version="4.25.0" _module_preset="default" global_colors_info="{}"]

Grus v2 Mod basic operations:
– Power on / off: Press the fire button 5 times in a row.
– Lock / Unlock: Press the (+) and (-) keys at the same time

Simplified menu:
Grus v2 Mod is very simple and intuitive, after unlocking the keys just move on the Display with “+ and -” and select the parameter you want to modify with the Selection key, to confirm the modification press the Selection key again.

With Power selected, press the Select button to change mode, with the (+) and (-) buttons choose between (POWER, TC-SS904, TC-SS316, TC-TI, TC-NI, VPC, VOLTAGE, BYPASS ).

Temperature control mode:
The temperature and wattage can be adjusted under SS904, SS316, TI.
The temperature value can be changed between 100 ° C and 315 ° C, 200 ° F and 600 ° F, the power can be set between 5.0-100 W.
* SS904 mode is specially designed for UB Pro P3 coil which is built with SS904 wire.

VPC mode:
VPC mode is a custom curve output mode. The output power value can be changed every 0.5 seconds within 4 seconds from 5 to 100W.

User Settings:
To override the current user setting, press the Select button once, then press and hold the Select button for two seconds to confirm.

Boost function:
Grus v2 Mod supports Boost functionality in power mode to increase / decrease the pre-hit (Soft, Norm, Hard).

Bypass:
It allows you to vape automatically, the power decreases as the battery drops, with the Bypass function activated it is not possible to use the “Boost” function.

Puff time display and puff count reset:
1) The Puff Time is displayed for 2 seconds after activation (fire).
2) When the Puff count is highlighted press the Select button to reset it.

Setting:
Setting is the last item on the Display and allows you to access various settings (Atomizer, Screen, Color, User, Reset, About, Back).
– Atomizer: Allows you to view the settings of the atomizer in the various modes, to measure the resistance (TC) and to make other changes.
– Screen: You can adjust screen brightness, press the (+) and (-) buttons.
– Color: You can select six different background colors (Light Blue, Yellow, White, Red, Green, Blue).
– User: In this screen you can change Mode, Resistance, Power, Voltage, Boost Level or Temperature and save 3 different Pre-Sets.
– Reset: To reset all settings to factory defaults select (YES) and confirm.
– About: Displays the Lost Vape logo and the installed software version.
– BacK: To return to the main interface.

Refill:
The device has a built-in DC 5V type USB port, powered by a Type-C cable.
While charging the battery icon will start to animate, once the charge is complete it stops. (Battery Voltage 4.18V).

Protections and warnings:
Battery Low
Check Atomizer
Short circuit
Too Hot: The device will turn off when the indoor temperature is above 85 ° C. Until the temperature returns to 65 ° C.
Cut Off: Over 10s, the output will be automatically cut off and the screen shows “Over 10s” when you vape over 10s continuously

[/et_pb_text][et_pb_image src="http://headless.local/wp-content/uploads/2024/05/Lost-Vape-Grus-v2-ModUB-Pro-Tank-19.webp" alt="lost vape" _builder_version="4.25.0" _module_preset="default" global_colors_info="{}"][/et_pb_image][et_pb_text _builder_version="4.25.0" _module_preset="default" global_colors_info="{}"]

Final Conclusions:

Grus v2 kit I call it a high-end mod at a popular price, built in resistant zinc alloy it is aesthetically pleasing but rather heavy. The Mod allows the use of 21700/20700/18650 cells and Type C charging.

The new Quest 2.0 Chipset provides more stable performance with a powerful delivery and adjustable to 3 boost levels, also in the menu for TC you can immediately set the wattage you want, the temperature and power can be fine-tuned in SS / TI / NI modes , saved and overwritten in three different user presets.
Performance, and battery life with the new Quest 2.0 chipset are significantly improved.

Grus v2 Kit with the new 26mm UB and UB PRO tanks has best interpreted the technology of circular design tanks by optimizing AFC performance and ease of use (refil).
UB and UB PRO Tank enjoy a complete series of coils and accessories, but one of the best aspects of the Mod Grus is the fact that they can use large after market atomizers, up to 31mm without overflowing.

Here are my impressions with the two tanks, the main coils and the two RBA modules:

– UB Pro Tank 5ml
Mesh-Coil UB Pro P1 NI80 from 0.15Ω Range 70-90W:
This new generation Coil must be combined with the 5ml UB Pro cartridge.
Given the great power that can be reached, the triple AFC is 100% exploitable. Starting from 70W (minimum range), the reactivity to the Fire is immediate, from 80 to 90W with AFC wide open you undoubtedly get a great yield and a lot of vapor emission, the power supply seems constant and the coil does not show to suffer the highest powers .
The Puff is always very quiet, by slightly choking the AFC, the aromatic yield increases hand in hand with the heat. To obtain the best aromatic performance with the new coil, you must first consume a couple of Tanks.

– UB Pro Tank 5ml
0.3Ω Mesh-Coil UB Pro SS904 Range 60-70W:
This very interesting Mesh-Coil can be used indifferently in VW or in TC / SS904 with settings between 260-290 ° C and 500-550 ° F.
The first impressions beyond the modality used are those of a balanced Coil, with a dry Puff, the flavor seems to me to be very accentuated the sugary part of the liquid.
The initial power delivery is certainly faster in VW mode, in TC you feel a greater linearity of the Puff, I am not a TC expert, I rarely use it, however I think it is a good experience, I was missing it.
I assume that a longer coil life can also be achieved with the TC.

– UB Pro Tank 5ml
RBA UB Pro Postless Style:
I was fine with the supplied Ø3mm coil which turns out to be 0.3Ω.
I started at 30W and since its liquid supply is very good, I ended up using it at 37W without any inconvenience.
The 5ml of liquid that contains the UB Pro cartridge and the medium / low consumption of liquid allow long vaping sessions, some small difficulties with small screws can be encountered during the build of the coil, however it seems to me a very good RBA balanced for a good flavor, the solution of having a Ø2mm under-coil hole seems to me to be guessed right.

– UB Tank 5.5ml
0.2Ω Ultra Boost Mesh-Coil M4 with 40-60W Range:
The coil, as expected, has the same good yield as the other Sub-Ohms of the PRO series, I use it with open air-flow at 45 / 50W, by restricting the AFC aperture you get big improvements in the quality of the aroma.
The body of the steam is remarkable, the puff is soft and silent, you can reach 60W (maximum limit of the coil) without showing any signs of failure.

– UB Tank 5.5ml
Ultra Boost MTL regular Coil 1.0Ω with 8-15W range:
This resistance (not mesh) has two air-flow holes so small that they hardly need to be choked to get a good MTL puff.
I found the best compromise at 13.5W, the vapor is dry, warm enough, with Hit quite similar to traditional cigarettes, the consumption of liquid is very limited, the 5.5ml capacity of the Ultra Boost Tank really last a long time.
By completely closing the AFC ring but also by adopting a more restrictive Drip-Tip 510, the 1.0Ω Ultra Boost MTL coil by lost Vape is really optimal for an MTL vape and satisfies a lot the blow in the throat even with low concentrations of nicotine, I don’t I would never have expected such a good result from a Tank devoted to lung vaping, thanks to the AFC regulation (completely closed) which is very precise and does not let air drafts through.

– UB Tank 5.5ml
RBA Ultra Boost Velocity Style:
This is certainly a useful accessory for those who want to have fun building MTL / RDL Coils, however it is not so easy to achieve the performance of the excellent Ultra-Boost Coils.
With this little RBA you can try your skills, even newbies can learn since it is not difficult to builds.
If you prefer the open Puff I recommend the purchase of the other Deck RBA UB Pro Postless Style combined with the Tank UB PRO.

Lost Vape Grus v2 Quest Kit 100W Highlights:
– 5 Vape Modes:
• VPC mode (variable power curve)
• Bypass mode
• Wattage mode
• Voltage mode
• Temperature control mode (SS316 / Ti / Ni)
– Three power steps (Soft, Norm Hard)
– Three additional user memories
– Type-C charging
– Superior quality Lost Vape construction
– Adjustable AFC in steel
– Convenient side refill at the top
– Coil UB Pro 0.3ohm for TC
– Tank UB Pro and Tank UB both sold separately
– RBA UB Pro or RBA Ultra boost both sold separately
– Wide choice of Coils for both systems
– Drip Tip 510 and 810 both replaceable

Thank you for reading.

Thanks to Lost Vape for submitting this product for the review:
Grus 100W Kit – Lost Vape

[/et_pb_text][et_pb_image src="http://headless.local/wp-content/uploads/2024/05/Lost-Vape-Grus-v2-ModUB-Pro-Tank-20.webp" alt="lost vape" _builder_version="4.25.0" _module_preset="default" global_colors_info="{}"][/et_pb_image][et_pb_code _builder_version="4.25.0" _module_preset="default" global_colors_info="{}"]Share On:[Sassy_Social_Share][/et_pb_code][/et_pb_column][/et_pb_row][/et_pb_section]